שלום
רציתי לשאול לגבי אפשרות של חיבור רמקולים עם התנגדות שונה לרסיבר
ברשורתתי רסיבר: AVR-X1400H denon
זוג רמקולים קדמיים: polk s15
בנוסך יש ברשותי יחידה של רמקול microlab solo 7c הרמקול הפסיבי
השאלה היא כזו: האם אפשר לחבר את הרמקול הפסיבי בתור סנטר זמני \ לטסטים
זה בטוח לעשות את זה? מבחינת זרם ועוצמה? נזק לרסיבר לאורך הזמן?
נתונים של s15
System Components 2 speakers
Amplification Type passive
Crossover Channel Qty 2-way
Frequency Response 50 - 40000 Hz
Nominal Impedance 8 Ohm
Recommended Amplifier Power 20 Watt
Sensitivity 88 dB
Crossover Frequency 2500Hz
נתונים של microlab solo 7c
Speakers: Tweeter driver type: 1"
Tweeter rated power: 10 Watt 6 ohm
Bass and mid-range driver type: 6.5"
Bass and mid-range rated power: 30 Watt 4 ohm
Frequency range: 55Hz - 20kHz
שילוב רמקולים עם ohm שונה
- superbizho (פותח השרשור)
-
- חבר פעיל במיוחד
- הודעות: 671
- הצטרף: יוני 2014
- נתן תודות: 40 פעמים
- קיבל תודות: 45 פעמים
- freedom_il
-
- חבר ותיק
- הודעות: 2159
- הצטרף: אוגוסט 2011
- נתן תודות: 80 פעמים
- קיבל תודות: 196 פעמים
- superbizho (פותח השרשור)
-
- חבר פעיל במיוחד
- הודעות: 671
- הצטרף: יוני 2014
- נתן תודות: 40 פעמים
- קיבל תודות: 45 פעמים
יש צורך לשנות הגדרות הרסיבר ?
מצאתי את זה בדוקומנטציה
arry out the following settings when using a speaker with an impedance of 4 – 6 Ω/ohmsc.
1.
2. 3.
Press and hold the main unit’s ZONE2 SOURCE and STATUS at the same time for at least 3 seconds.
“V.Format:< NTSC>” appears on the display. Press DIMMER on the main unit three times.
“Sp.Imp.:<8ohms>” appears on the display.
Press TUNER PRESET CH + or TUNER PRESET CH - on the main unit to select the impedance.
8ohms Select when the impedance for all of the (Default): connected speakers is 8 Ω/ohms or over.
6ohms:
Select when the impedance for any of the connected speakers is 6 Ω/ohms.
4ohms:
Select when the impedance for any of the connected speakers is 4 Ω/ohms.
מצאתי את זה בדוקומנטציה
arry out the following settings when using a speaker with an impedance of 4 – 6 Ω/ohmsc.
1.
2. 3.
Press and hold the main unit’s ZONE2 SOURCE and STATUS at the same time for at least 3 seconds.
“V.Format:< NTSC>” appears on the display. Press DIMMER on the main unit three times.
“Sp.Imp.:<8ohms>” appears on the display.
Press TUNER PRESET CH + or TUNER PRESET CH - on the main unit to select the impedance.
8ohms Select when the impedance for all of the (Default): connected speakers is 8 Ω/ohms or over.
6ohms:
Select when the impedance for any of the connected speakers is 6 Ω/ohms.
4ohms:
Select when the impedance for any of the connected speakers is 4 Ω/ohms.
NAS: Custom made 15TB WD RED
TV: Samsung mu9000 65
Sound 5.1.2: Denon x1400H + SVS ULTRA
TV: Samsung mu9000 65
Sound 5.1.2: Denon x1400H + SVS ULTRA
- Amir64
-
- גורו
- הודעות: 10043
- הצטרף: אוגוסט 2012
- נתן תודות: 178 פעמים
- קיבל תודות: 1733 פעמים
- superbizho (פותח השרשור)
-
- חבר פעיל במיוחד
- הודעות: 671
- הצטרף: יוני 2014
- נתן תודות: 40 פעמים
- קיבל תודות: 45 פעמים
- Amir64
-
- גורו
- הודעות: 10043
- הצטרף: אוגוסט 2012
- נתן תודות: 178 פעמים
- קיבל תודות: 1733 פעמים
- Amir64
-
- גורו
- הודעות: 10043
- הצטרף: אוגוסט 2012
- נתן תודות: 178 פעמים
- קיבל תודות: 1733 פעמים
@LiorShap
בבקשה תקרא...
כתבתי שרק צריך לעשות חיפוש, אז לא אכתוב שוב את הכל:
https://www.hometheater.co.il/vp2436608.html
בבקשה תקרא...
כתבתי שרק צריך לעשות חיפוש, אז לא אכתוב שוב את הכל:
https://www.hometheater.co.il/vp2436608.html